Obtain the free Chew Me Bambi multitracks – https://producelikeapro.lpcontent.internet/bite-me-bambi-let-me-love-you-multitracks-form
Hearken to “Let Me Love You” by Chew Me Bambi on Spotify
A bass buzzes. An previous EQ crackles. The band has performed the music for years, however everybody’s nonetheless debating whether or not the second refrain wants a key change. That’s what I like about watching Grammy-winning producer and mixer Cameron Webb work with Chew Me Bambi. You hear the file come collectively, and also you get to see how he handles the choices that come up in an actual session.
Cameron takes us by the recording and mixing of “Let Me Love You”, from getting a drum sound out of a classic Ludwig equipment to deciding precisely which horn hit ought to echo throughout the stereo subject. Obtain the free multitracks and you’ll hear what these choices do in your personal DAW.
Observe the band dwell and concentrate on the drums
Cameron begins with everybody taking part in collectively. The purpose of the primary cross is to seize a drum efficiency price maintaining. The scratch bass, guitar and vocals give drummer Dan the context he must play the music, so Cameron can think about the texture, the tuning and the way the drums carry the transitions.
He retains Dan’s headphone combine easy with 4 controls for drums, bass, the remainder of the band and the press. Dan brings his personal in-ears, which assist hold the press out of the snare and overhead mics. As soon as the equipment sounds good within the management room, Cameron brings Dan in to listen to it. If the snare tuning or kick tone wants to alter, they will type it out earlier than committing to takes.
Construct the drum sound a mic at a time
Cameron blends an Audio-Technica ATM25 contained in the kick with a Sony C500. The within mic provides him definition, whereas the darker Sony fills out the underside. An older omnidirectional mic on the beater facet additionally picks up a number of the snare and ground tom. Soloed, it’s an odd sound. Blended into the equipment, it provides weight and character.
He works shortly by the remainder of the equipment. An SM57 captures the highest of the snare, ATM25s sit near the tom heads and a pair of AKG C414s function overheads. He sweeps the overhead EQ to seek out the low-mid frequency that bothers him, then pulls it again by a decibel or two. For a rougher room sound, he compresses a mono SM58. You possibly can hear how a lot the equipment opens up as he brings the room mics in.
Make association choices whereas the band is within the room
Certainly one of my favorite moments comes when Cameron questions the important thing change. He loves the refrain in its authentic key and desires to listen to that hook return with the identical really feel. The band talks it by, drops the modulation and asks Dan to attempt an easier fill into the part. It’s a small change on paper, nevertheless it modifications how the refrain lands.
The identical give-and-take occurs with the guitar tone. Cameron tries a unique amp, then compares it with Brian’s scratch observe. There’s one thing concerning the authentic sound that works higher with the rhythm part, so that they return to Brian’s setup and roll off a bit brightness collectively. Listening to each sounds within the observe will get them to a call quicker than tweaking both one in isolation.
Give every bass observe a job
Cameron information three bass indicators: a DI, an Ampeg SVT for the deeper frequencies and a cleaner amp for upper-end definition. The primary bass produces a buzz that turns into extra apparent as he provides treble. He retains the scratch cross shifting and switches basses for the keeper.
Every sign goes by its personal Distressor at 4:1 throughout monitoring. Within the combine, Cameron checks how the three indicators sum, then routes them to a single bass bus for shared EQ and a contact of LA-2A compression. The 2 amps provide many of the tone, with the DI tucked beneath.
Maintain the groove clear and make the consequences depend
Cameron builds an instrumental stability earlier than bringing within the vocals. He teams the kick, snare and toms so he can form every as an entire, then listens to what modifications because the bass, guitar, organ and percussion are available. Just a little shared reverb helps the devices really feel as if they occupy the identical house. On a devoted snare reverb, he places a gate earlier than the impact to cut back how a lot hi-hat and kick bleed reaches the reverb.
The extra dramatic results get their very own moments. Three intro vocals undergo a separate bus for filtering, distortion and delay, with automation opening up the sound earlier than the drums arrive. Cameron sends a single horn hit right into a quarter-note delay for a dub-style echo and tries the reverb on both facet of the delay to listen to the way it modifications the repeats. Elsewhere, he rides the horns down to present the vocals extra room.
Take the combo out to the automotive
The primary automotive hear tells Cameron that the snare and hi-hat are darker than he desires. Again within the studio, he goes to the person prime snare mic for extra crack and revisits the intro vocal, automating the high-cut filter to easy out the distorted entrance.
He prints one other combine for the band, and their suggestions takes him again to a snare impact within the final refrain. They like what it does there, so that they hear collectively and resolve the place else it earns a spot.
Obtain the free multitracks and get the Cameron Webb Every thing Bundle
Obtain the free Chew Me Bambi multitracks
The Cameron Webb Every thing Bundle contains the complete Music Manufacturing Masterclass featured right here. You’ll comply with Cameron as he produces, information, edits and mixes two Chew Me Bambi songs, “Let Me Love You” and “Mall Santa”. The bundle additionally contains 4 extra programs masking fashionable rock, punk rock and mixes for Motörhead and The Aquabats.







